Eaton Logo

Wall-mounted Source Controllers

Which LED downlights are compatible with SCI type dimmers

The SCI Inductive Source Controller models are leading-edge mains dimming units suitable for controlling resistive and inductive load types. These include Read more...

If DALI wires are connected to 240V AC voltage what will happen?

If 240Vac is applied to the DALI control pair this is highly likely to damage the DALI controller and any devices connected to this DALI network (ballasts, Read more...

0-10V lights not turning off completely?

0-10V is distinct from 1-10V in that power does not need to be switched off to achieve zero illumination from the light source. For 0-10V to work, both Read more...

Connecting to mains?

Please refer to the product installation manual for details about mains supply connection. IMPORTANT: Installation and termination of mains cabling Read more...

How do I perform a factory reset for iLight products?

There is no factory reset option, but it is possible to upload a factory default configuration to the device from the iLight software. This can be aquired Read more...

Where can I find the manual for the SCi1210S

The Source Controller manual can be found at the iLight website - http://ilight.co.uk/products-source-controllers.html Read more...

What are the dimensions of an SCH1210 Source Controller?

The dimensions (mm) are 550hx220wx155d for the S version, 550hx255wx155d for the RCBO/RCBOX version and 690hx220wx155d for the D version. Read more...

What are the dimensions of an SCLED0405 Source Controller?

The dimensions (mm) are 280hx220wx155d for the S version, 340hx255wx155d for the RCBO/RCBOX version and 400hx220wx155d for the D version. Read more...

What are the dimensions of an SCI1205 Source Controller?

The dimensions (mm) are 550hx220wx155d for the S version, 550hx255wx155d for the RCBO/RCBOX version and 690hx220wx155d for the D version. Read more...

What type of lighting loads are compatible with SCI Inductive Source Controllers?

The SCI Inductive Source Controller models are leading-edge mains dimming units suitable for controlling resistive and inductive load types. These include Read more...

Extended ASCII PCB

The Extended ASCII PCB is an accessory for most Wall-mounted Source Controller (SC-) types that increases the capabilities of the RS485 in/out port. This Read more...

Can I use another processor PCB in my iLight dimmer?

The processor PCB (CPU) in each iLight source controller stores the output settings for that specific unit (Area, Channel, Scene Levels). This information Read more...

Can I perform an Earth Loop Impedance test with an iLight system?

When installations are Earth Loop Impedance tested using electronic earth loop impedance testers and the system includes Inductive source controllers (SCI Read more...

I am looking for a EM6784

EM6784 is the 12 x 5A output PCB for the SCi1205 Source Controller. Order code is CC04-018-00 If you would like to order this part please send your Read more...

How do you install a di-1 dmx input PCB to a source controller?

The DI-1 DMX Input card plugs into the 10-pin socket on the Source Controller CPU card. The Source Controller’s power must be reset after Read more...

SCLED

Please type a more specific question to help us find the right answer for you regarding the SCLED. For datasheets and installation guides on this product, Read more...

Can I power a three-phase Source Controller with a single-phase supply?

Yes. Link the single-phase supply across on the supply side of the isolator. Ensure that the total loading of the Source Controller is suitable for the Read more...

What are the dimensions of an SCD24 DMX Controller?

The dimensions (mm) are 240hx220wx80d. Read more...

What are the dimensions of an SCD96 DMX Controller?

The dimensions (mm) are 240hx220wx80d. Read more...

What are the dimensions of an SCI0805 Source Controller?

The dimensions (mm) are 400hx220wx155d. For the RCBO/RCBOX version the dimensions are 440hx255wx155d. Read more...

What are the dimensions of an SCS1220 Source Controller?

The dimensions (mm) are 550hx220wx155d for the S version, 550hx255wx155d for the RCBO/RCBOX version and 690hx220wx155d for the D version. Read more...

What are the dimensions of an SCS1210 Source Controller?

The dimensions (mm) are 550hx220wx155d for the S version, 550hx255wx155d for the RCBO/RCBOX version and 690hx220wx155d for the D version. Read more...

What are the dimensions of an SCS0410 Source Controller?

The dimensions (mm) are 280hx220wx155d for the S version, 340hx255wx155d for the RCBO/RCBOX version and 400hx220wx155d for the D version. Read more...

What are the dimensions of an SCA1210 Source Controller?

The dimensions (mm) are 850hx330wx155d. The RCBO/RCBOX version please contact Technical Support. Read more...

What are the dimensions of an SCA0410 Source Controller?

The dimensions (mm) are 375hx330wx155d. For the RCBO/RCBOX version please contact Technical Support. Read more...

What are the dimensions of an SCH1200T Source Controller?

The dimensions (mm) are 240hx220wx80d. Read more...

What are the dimensions of an SCH1220 Source Controller?

The dimensions (mm) are 550hx220wx155d for the S version, 550hx255wx155d for the RCBO/RCBOX version and 690hx220wx155d for the D version. Read more...

What are the dimensions of an SCH0410 Source Controller?

The dimensions (mm) are 280hx220wx155d for the S version, 340hx255wx155d for the RCBO/RCBOX version and 400hx220wx155d for the D version. Read more...

What are the dimensions of an SCLED1205 Source Controller?

The dimensions (mm) are 550hx220wx155d for the S version, 550hx255wx155d for the RCBO/RCBOX version and 690hx220wx155d for the D version. Read more...

What are the dimensions of an SCI1220 Source Controller?

The dimensions (mm) are 850hx330wx155d. The RCBO/RCBOX version is 850hx374wx155d. Read more...

What are the dimensions of an SCI1210 Source Controller?

The dimensions (mm) are 850hx330wx155d. The RCBO/RCBOX version is 850hx374wx155d. Read more...

What are the dimensions of an SCI0420 Source Controller?

The dimensions (mm) are 375hx330wx155d for the S version and 450hx330wx155d for the D version. For RCBO/RCBOX version please contact Technical Support. Read more...

What are the dimensions of an SCI0410 Source Controller?

The dimensions (mm) are 400hx220wx155d for all versions. Read more...

What are the dimensions of an SCI0405 Source Controller?

The dimensions (mm) are 280hx220wx155d for the S version, 340hx255wx155d for the RCBO/RCBOX version and 400hx220wx155d for the D version. Read more...

What is the maximum loading for the SCI0805 Combined Source Controller?

The SCI0805 Switched Source Controller is rated at 5A per output (1000W @ 240Vac). Please refer to this product's datasheet at www.ilight.co.uk for a full Read more...

What type of lighting loads are compatible with the SCI0805 Combined Source Controller?

The SCI0805 Combined Source Controller is suitable for controlling leading-edge mains dimmable lamps and transformers (outputs 1-4 only) and analogue 1-10 Read more...

What is the maximum loading for an SCS1220 Switched Source Controller?

The SCS1220 Switched Source Controller is rated at 20A per output (2000W @ 240Vac). Please refer to this product's datasheet at www.ilight.co.uk for a Read more...

What is the maximum loading for an SCS1210 Switched Source Controller?

The SCS1210 Switched Source Controller is rated at 10A per output (2000W @ 240Vac). Please refer to this product's datasheet at www.ilight.co.uk for a Read more...

What is the maximum loading for an SCS0410 Switched Source Controller?

The SCS0410 Switched Source Controller is rated at 10A per output (2000W @ 240Vac). Please refer to this product's datasheet at www.ilight.co.uk for a Read more...

What type of lighting loads are compatible with SCS Switched Source Controllers?

The SCS Switched Source Controller models are suitable for controlling switched load types only (no dimming function) Read more...

What is the maximum loading for an SCA1210 Adaptive Source Controller?

The SCA1210 Adaptive Source Controller is rated at 10A per output (1000W @ 240Vac). NOTE: Derating to 10% maximum load is recommended for most LED load Read more...

What is the maximum loading for an SCA0410 Adaptive Source Controller?

The SCA0410 Adaptive Source Controller is rated at 10A per output (1000W @ 240Vac). NOTE: Derating to 10% maximum load is recommended for most LED load Read more...

What type of lighting loads are compatible with SCA Adaptive Source Controllers?

The SCA Adaptive Source Controller models are trailing and leading-edge mains dimming units suitable for controlling low-voltage electronic dimmable Read more...

What is the maximum loading for an SCH1220 HF Ballast Source Controller?

The SCH1220 HF Ballast Source Controller is rated at 20A per output (2000W @ 240Vac). Please refer to this product's datasheet at www.ilight.co.uk for a Read more...

What is the maximum loading for an SCH1210 HF Ballast Source Controller?

The SCH1210 HF Ballast Source Controller is rated at 10A per output (2000W @ 240Vac). Please refer to this product's datasheet at www.ilight.co.uk for a Read more...

What is the maximum loading for an SCH0410 HF Ballast Source Controller?

The SCH0410 HF Ballast Source Controller is rated at 10A per output (2000W @ 240Vac). Please refer to this product's datasheet at www.ilight.co.uk for a Read more...

What type of lighting loads are compatible with SCH HF Ballast Source Controllers?

The SCH HF Ballast Source Controller models are suitable for controlling analogue 1-10V, digital DSI and DALI (broadcast only) and switched load types ( Read more...

What is the maximum loading for an SCLED1205 Transistor Source Controller?

The SCLED1205 Transistor Source Controller is rated at 5A per output (1000W @ 240Vac), but derating to 10% maximum load is recommended for most LED load Read more...

What is the maximum loading for an SCLED0405 Transistor Source Controller?

The SCLED0405 Transistor Source Controller is rated at 5A per output (1000W @ 240Vac), but derating to 10% maximum load is recommended for most LED load Read more...

What type of lighting loads are compatible with SCLED Transistor Source Controllers?

The SCLED Transistor Source Controller models are trailing and leading-edge mains dimming units suitable for controlling dimmable LED lamps and low- Read more...

What is the maximum loading for an SCI1220 Inductive Source Controller?

The SCI1220 Inductive Source Controller is rated at 20A per output (4000W @ 240Vac). Please refer to this product's datasheet at www.ilight.co.uk for a Read more...

What is the maximum loading for an SCI1210 Inductive Source Controller?

The SCI1210 Inductive Source Controller is rated at 10A per output (2000W @ 240Vac). Please refer to this product's datasheet at www.ilight.co.uk for a Read more...

What is the maximum loading for an SCI1205 Inductive Source Controller?

The SCI1205 Inductive Source Controller is rated at 5A per output (1000W @ 240Vac). Please refer to this product's datasheet at www.ilight.co.uk for a Read more...

What is the maximum loading for an SCI0420 Inductive Source Controller?

The SCI0420 Inductive Source Controller is rated at 20A per output (4000W @ 240Vac). Please refer to this product's datasheet at www.ilight.co.uk for a Read more...

What is the maximum loading for an SCI0410 Inductive Source Controller?

The SCI0410 Inductive Source Controller is rated at 10A per output (2000W @ 240Vac). Please refer to this product's datasheet at www.ilight.co.uk for a Read more...

What is the maximum loading for an SCI0405 Inductive Source Controller?

The SCI0405 Inductive Source Controller is rated at 5A per output (1000W @ 240Vac). Please refer to this product's datasheet at www.ilight.co.uk for a Read more...